A refinery startup is one of the highest-risk moments in a facility's life: dozens of systems, teams, and procedures have to come together at once, and a single missed check can turn a routine startup into a costly incident or an extended delay. This course gives engineers and operations teams a practical, field-tested approach to taking a refinery from construction, turnaround, or shutdown into stable, reliable production without the guesswork.

Delivered by Arab British Fellowship Training Academy within its Operations Readiness and Assurance Training courses and categorised under Engineering maintenance and operation, participants work through real startup scenarios covering commissioning handover, pre-startup verification, equipment energisation, process stabilisation, and the safety and coordination disciplines that keep a startup on schedule and under control.

By the end of this course, participants will be able to:

• Break down a refinery startup into its critical phases, from mechanical completion through to stable production, and identify what "ready" actually means at each stage.
• Plan and sequence commissioning activities, including cleaning, flushing, pressure testing, and utility verification, before any equipment is energised.
• Build unit-by-unit startup plans, checklists, and control points that reflect real operating conditions rather than generic templates.
• Manage equipment energisation, line-up, and initial operation for pumps, compressors, furnaces, reactors, and heat exchangers.
• Introduce feed safely, stabilise process conditions, and monitor temperature, pressure, flow, and level during the transition to normal operation.
• Apply process safety management principles, including pre-startup safety reviews, permit-to-work, and isolation controls specific to startup activities.
• Connect turnaround and shutdown work to the restart process, verifying maintenance completion and closing outstanding punch-list items before recommissioning.
• Recognise early warning signs of abnormal startup conditions and apply structured troubleshooting and escalation approaches.
• Coordinate effectively across engineering, operations, maintenance, and HSE teams throughout commissioning and handover.
• Confirm operational readiness through assurance reviews, documentation checks, and workforce competency verification before final sign-off.

Who Should Attend

This course is built for the people who carry direct responsibility for a safe, on-schedule startup:

• Commissioning and startup engineers.
• Refinery operations and process engineers.
• Plant, shift, and production managers.
• Maintenance and reliability engineers.
• Turnaround and shutdown personnel.
• Process control and instrumentation engineers.
• Mechanical and electrical engineers supporting refinery operations.
• HSE and process safety professionals.
• Project engineers involved in plant handover.
• Operations readiness and assurance specialists.

Module 1: Why Startups Go Wrong, and How to Get Ahead of It

• Common causes of startup delays, incidents and rework.
• The real cost of a poorly planned startup.
• Operational readiness and assurance frameworks.
• Roles and responsibilities across engineering, operations, maintenance and HSE.
• Overview of the startup lifecycle: construction to steady-state.

Module 2: From Construction to Commissioning: Mechanical Completion and Handover

• Commissioning strategy and planning.
• Mechanical completion and system handover.
• Equipment inspection and verification.
• Cleaning, flushing, pressure testing and leak testing.
• Utility and offsite system readiness.
• Pre-commissioning documentation and records.

Module 3: Building the Startup Plan

• Developing refinery startup plans.
• Startup sequences and operating procedures.
• Unit-by-unit startup preparation.
• Equipment line-up and system configuration.
• Startup checklists and control points.

Module 4: Equipment, Utility and Systems Readiness

• Pumps, compressors, furnaces, reactors, columns and heat exchangers.
• Electrical and instrumentation readiness.
• Control system and alarm verification.
• Steam, cooling water, fuel gas, nitrogen and instrument air systems.
• Rotating equipment readiness and protection systems.

Module 5: Process Operations During Startup

• Initial feed introduction.
• Temperature, pressure, flow and level control.
• Process stabilisation and monitoring operating parameters.
• Coordination with control room operations.
• Transition from startup conditions to normal operation.

Module 6: Safety and Risk Management During Startup

• Startup hazards and process safety management principles.
• Pre-startup safety reviews and permit-to-work requirements.
• Isolation and lockout/tagout considerations.
• Safe handling of hydrocarbons and process chemicals.
• Emergency response during startup.

Module 7: Turnaround-to-Restart: Closing the Loop on Maintenance

• Relationship between turnaround and refinery startup.
• Shutdown-to-restart planning.
• Maintenance completion verification and punch-list management.
• Equipment reinstatement and system restoration.
• Restart risk assessment and post-turnaround readiness.

Module 8: Troubleshooting Abnormal Startup Conditions

• Common startup failures and process deviations.
• Alarm management during startup.
• Root-cause thinking, escalation and decision-making.
• Managing unexpected operating conditions.

Module 9: Readiness Assurance, Handover and Performance Stabilisation

• Readiness reviews, assurance processes and acceptance criteria.
• Operating procedures, documentation and competency verification.
• Handover from projects and commissioning teams to operations.
• Monitoring production and reliability indicators after startup.
• Lessons learned and continuous improvement.